HPE Network Data Center Professional Architect (HPE7-A12) Certification Sample Questions
Getting knowledge of the Hewlett Packard Enterprise HPE7-A12 exam structure and question format is vital in preparing for the HPE Network Data Center Professional Architect certification exam. Our HPE Network Data Center Professional Architect sample questions offer you information regarding the question types and level of difficulty you will face in the real exam. The benefit of using these Hewlett Packard Enterprise HPE7-A12 sample questions is that you will get to check your preparation level or enhance your knowledge by learning the unknown questions. You will also get a clear idea of the exam environment and exam pattern you will face in the actual exam with the HPE Network Data Center Professional Architect Sample Practice Test. Therefore, solve the HPE ACP-DCArc sample questions to stay one step forward in grabbing the HPE Aruba Networking Certified Professional - Data Center Architect credential.
These Hewlett Packard Enterprise HPE7-A12 sample questions are simple and basic questions similar to the actual HPE Network Data Center Professional Architect questions. If you want to evaluate your preparation level, we suggest taking our HPE Network Data Center Professional Architect Premium Practice Test. You might face difficulties while solving the real-exam-like questions. But, you can work hard and build your confidence on the syllabus topics through unlimited practice attempts.
Hewlett Packard Enterprise HPE7-A12 Sample Questions:
01. In a preliminary spine-leaf design for an enterprise data center, a pair of firewalls and a pair of load balancers must serve every tenant VRF. The customer wants appliance attachment to follow the same patterns as the rest of the fabric. Where should the appliances attach in the preliminary design?
a) To a dedicated services leaf pair connected to the spines like any other leaf
b) One firewall and one load balancer on each of several server leaves, spread across the fabric
c) To the out-of-band management switches, which already reach every rack in the hall
d) Directly to the spines, so that the appliances sit at the center of the fabric for all traffic
02. The architect has finished the design and validated it against the customer's requirements. The customer presentation is scheduled for next week. Which two review steps should take place before the presentation?
(Select TWO.)
a) Sending the draft to the customer early so that their own team can find the errors first
b) An internal peer review by an architect who was not involved in the design
c) A check against the organization's own design standards, with every deviation documented and justified
d) A repeat validation against the requirements by the architect who wrote the design
03. A retailer's remote data center has no on-site spares, and the nearest service depot is several hours away. The customer requires replacement hardware at the rack within four hours of a leaf failure, because while it is down its VSX partner is a single point of failure. The draft bill of materials includes next-business-day hardware support for that site, and the support budget covers an upgrade for that site only.
Which support provision is correct?
a) Next-business-day support is enough, since VSX keeps dual-homed servers online during replacement
b) The highest support tier on every device the retailer owns, to remove the risk everywhere
c) Next-business-day support is enough if operations documents the replacement procedure in advance
d) A four-hour on-site support level for that remote site, or spare switches held on the site itself
04. While the design is being presented to the security team, the CISO objects that moving east-west inspection from the central firewall cluster to distributed stateful firewalling at the top of rack weakens control. The customer's stated requirement is stateful inspection of all east-west traffic between application tiers, with central policy and audit logging.
What is the best response?
a) Explain that the central firewall cluster is outdated and the security team should accept the change
b) Show how the design meets each stated requirement, then invite the team to review the policy
c) Defer the objection to the implementation phase, when the configuration can be demonstrated
d) Remove the distributed firewalling from the design in order to keep the security team's support
05. Hypervisor hosts mark their storage and live-migration traffic with DSCP values that the fabric's QoS design relies on. Guest virtual machines on the same hosts can also set DSCP values on their own traffic. Which two design choices set the QoS trust boundary correctly?
(Select TWO.)
a) Re-mark traffic from guest VM segments to the default class at the leaf
b) Ignore all markings and put every class in one queue, relying on link capacity alone
c) Trust markings only where hypervisor-originated storage and migration traffic arrives
d) Trust every DSCP marking received on every host port, so all applications keep their markings
06. During the design presentation for a logistics company, the COO says her operations team currently takes about three weeks to provision network connectivity for a new application, and two recent outages were traced to manual configuration errors. She asks how the proposed HPE Aruba Networking fabric will improve operational efficiency.
Which response BEST addresses the COO's concern?
a) Demonstrate the switch command line so she can see how quickly an engineer configures ports
b) Show the bill of materials and how the per-rack cost compares with the current network
c) Relate fabric automation to her three-week lead time and the error-driven outages
d) Walk through the EVPN route types and route-reflector placement the fabric control plane uses
07. A CFO is comparing two proposals for a new data center network. The architect's proposal costs more up front. The customer has forecast steady growth over the network's planned service life. Which two points best present the financial case to the CFO?
(Select TWO.)
a) Total cost of ownership over the service life, including support, power and operating effort
b) The discount available if the order is placed before the end of the current quarter
c) The proposed switches publish the highest throughput and port density figures in their product class
d) The cost of later expansion under each proposal, given the growth the customer forecast
08. To reduce cost, a customer wants to reuse the third-party optics from its current network in the new fabric. It also requires full vendor support on the new network, including for problems that involve the optics. Which approach best meets both goals?
a) Reuse the optics and record, as a risk, that support cases involving them may be declined
b) Check each optic against the vendor's supported transceiver list and replace the rest
c) Replace every optic with new parts regardless of status, so that nothing from the old network is reused
d) Reuse all of the existing optics, because standards-based optics interoperate at the physical layer
09. An audit of a payment processor's data center found that administrators manage every switch in-band over the production network using a shared local admin account. The processor now requires that switches remain manageable when the production fabric fails, and that every administrative action be traceable to a named person with limited privileges.
Which design responses map to these requirements?
(Select TWO.)
a) Authenticate administrators centrally with individual accounts and role-based privileges
b) Move switch management to an out-of-band network separate from the production fabric
c) Keep in-band management but restrict it to the admin VLAN with ACLs on the production switches
d) Rotate the shared admin password monthly and store it in an encrypted password vault
10. In an EVPN-VXLAN fabric, each rack has a VSX leaf pair, and every server is dual-homed to both members with a multi-chassis LAG. Traffic from remote leaves to a dual-homed server should be able to arrive at either member of the pair. How should VTEP addressing be designed for the VSX pairs?
a) Each host is single-attached to one member for overlay traffic and dual-attached for underlay traffic
b) Each VSX member uses its own unique VTEP address, and remote leaves choose one member for each host
c) Only the primary VSX member acts as a VTEP, while the secondary sends overlay traffic across the ISL
d) Both VSX members share one logical VTEP address, so that remote leaves can send traffic to either member
Answers:
|
Question: 01 Answer: a |
Question: 02 Answer: b, c |
Question: 03 Answer: d |
Question: 04 Answer: b |
Question: 05 Answer: a, c |
|
Question: 06 Answer: c |
Question: 07 Answer: a, d |
Question: 08 Answer: b |
Question: 09 Answer: a, b |
Question: 10 Answer: d |
Note: For any error in HPE Network Data Center Professional Architect (HPE7-A12) certification exam sample questions, please update us by writing an email on feedback@certfun.com.
- HPE7-A12 Questions |
- HPE7-A12 Quiz |
- HPE7-A12 |
- HPE Network Data Center Professional Architect Certification |
- Hewlett Packard Enterprise HPE7-A12 Question Bank |
- ACP-DCArc Mock Exam |
- ACP-DCArc |
- HPE ACP-DCArc Certification |
- Network Data Center Professional Architect Sample Questions |
- Hewlett Packard Enterprise HPE7-A12 Practice Test Free |
- ACP-DCArc Certification Sample Questions
