Huawei HCIA-Computing (H13-211) Certification Sample Questions

Huawei H13-211 VCE, HCIA-Computing Dumps, H13-211 PDF, H13-211 Dumps, HCIA-Computing VCE, Huawei HCIA-Computing PDFGetting knowledge of the Huawei H13-211 exam structure and question format is vital in preparing for the Huawei Certified ICT Associate-Computing certification exam. Our Huawei HCIA-Computing sample questions offer you information regarding the question types and level of difficulty you will face in the real exam. The benefit of using these Huawei H13-211 sample questions is that you will get to check your preparation level or enhance your knowledge by learning the unknown questions. You will also get a clear idea of the exam environment and exam pattern you will face in the actual exam with the Huawei Certified ICT Associate-Computing Sample Practice Test. Therefore, solve the Huawei HCIA-Computing sample questions to stay one step forward in grabbing the Huawei Certified ICT Associate-Computing credential.

These Huawei H13-211 sample questions are simple and basic questions similar to the actual Huawei HCIA-Computing questions. If you want to evaluate your preparation level, we suggest taking our Huawei Certified ICT Associate-Computing Premium Practice Test. You might face difficulties while solving the real-exam-like questions. But, you can work hard and build your confidence on the syllabus topics through unlimited practice attempts.

Huawei H13-211 Sample Questions:

01. A delivery engineer is configuring four identical disks for a database server. The database performs a high volume of small random writes, and the array must keep running if any one disk fails. The customer accepts losing half of the raw capacity.
Which RAID level best meets these requirements?
a) RAID 5, which stripes data with parity distributed across all disks
b) RAID 0, which stripes data across all four disks with no redundancy
c) RAID 6, which stores two independent parity blocks for each stripe
d) RAID 10, which mirrors pairs of disks and then stripes data across the mirrored pairs
 
02. A delivery engineer is configuring network redundancy for a new server. The server's two service NICs connect to two access switches that operate independently: they are not stacked and do not support link aggregation across both switches. The customer requires service traffic to survive the failure of either switch, and the switch configuration may not be changed.
Which configuration meets these requirements?
a) Bond both NICs in active-backup mode, with one NIC on each switch
b) Bond both NICs in LACP (802.3ad) mode, with one NIC on each switch
c) Connect both NICs to the same switch and bond them in LACP (802.3ad) mode
d) Give each NIC its own IP address in the service subnet, without bonding
 
03. A server reports a fan module failure alarm and, shortly afterwards, a CPU temperature high alarm. The server is still running its services, and its fans are redundant.
Which actions should the engineer take? (Choose two.)
a) Replace the CPU, because the temperature alarm shows the processor is faulty
b) Clear both alarms manually so that the alarm list returns to normal
c) Replace the failed fan module while the server keeps running
d) Shut down the server and leave it off until a new CPU arrives
e) Confirm afterwards that the CPU temperature returns to normal and both alarms clear
 
04. A server's iBMC management port is connected to a management network, and its service NIC is connected to a separate service network. Clients cannot reach the web service on the server, but the engineer can still log in to the iBMC web interface. Through the remote console, the engineer runs ethtool on the service NIC, and the output shows Link detected: no.
Where is the fault most likely located?
a) In the iBMC, which forwards web traffic to clients
b) On the service NIC's physical link, such as its cable, optical module or switch port
c) In the web application, because the hardware and both network paths are proven healthy
d) In the management switch serving the iBMC port
 
05. On a two-socket server, an application's threads are pinned to cores on CPU 0. Monitoring shows that most of the application's memory pages were allocated from the DIMMs attached to CPU 1, and its memory access latency is higher than expected even though CPU utilization is low.
What is the most effective way to reduce the latency?
a) Install faster DIMMs in all of the memory channels attached to CPU 1
b) Spread the threads across more cores on CPU 0
c) Disable the link between CPU 0 and CPU 1 to remove all cross-socket traffic
d) Place the application's memory on the NUMA node local to CPU 0
 
06. During a PXE network installation, a new server starts a network boot. Its console shows that it obtained an IP address, but it then times out while downloading its boot file, and the installer never starts.
Which component should the engineer check first?
a) The TFTP server, which may not be reachable
b) The DHCP address pool, which may have run out of free addresses
c) The BIOS boot order, which may not include network boot
d) The RAID controller driver, which the installer may not include
 
07. An engineer is preparing to upgrade the BIOS and BMC firmware on a production server.
Which precautions should the engineer take? (Choose three.)
a) Install the newest beta firmware so the server gets fixes as early as possible
b) Back up the current BIOS and BMC configuration before the upgrade
c) Keep the server powered on until the upgrade reports completion
d) Confirm that the firmware package is the one released for this server model
e) Skip the release notes, because firmware upgrades are always backward compatible
 
08. An application process on a Linux server is terminated several times a day. The system log shows that the kernel's out-of-memory killer ended the process each time. The iBMC shows every memory module as healthy, with no memory alarms or errors.
What is the most likely cause, and what should the engineer do next?
a) Memory demand exceeds what is available; review usage and add memory or limit the process
b) A faulty memory module; replace the DIMM that the iBMC reports
c) Processor overheating; check the fans and clear the temperature alarm
d) A full system disk; delete old log files to free space for the process
 
09. Eight servers form a cluster that runs an online service. All of them need a BIOS firmware upgrade, which takes effect only after each server restarts. The service must remain available throughout.
Which plan meets both requirements?
a) Upgrade all eight servers together and restart them at once so that their firmware versions stay identical
b) Upgrade all eight servers now but postpone every restart indefinitely so that the service is never interrupted
c) Upgrade a few nodes at a time, moving their services to the rest first
d) Skip the upgrade, because firmware on a running cluster member must never be changed at all
 
10. An engineer needs a list of the hardware installed in a Linux server, rather than its current load.
Which commands provide this hardware inventory information? (Choose two.)
a) top
b) lscpu
c) iostat
d) uptime
e) lspci

Answers:

Question: 01
Answer: d
Question: 02
Answer: a
Question: 03
Answer: c, e
Question: 04
Answer: b
Question: 05
Answer: d
Question: 06
Answer: a
Question: 07
Answer: b, c, d
Question: 08
Answer: a
Question: 09
Answer: c
Question: 10
Answer: b, e

Note: For any error in Huawei Certified ICT Associate-Computing (H13-211) certification exam sample questions, please update us by writing an email on feedback@certfun.com.

Rating: 5 / 5 (75 votes)